Feedback about: C-Clamp Threaded Adapter


If you need to add a furniture-saver pad to the C-clamp, this [Parametric Wood Clamp Foot Pad]( with the following OpenSCAD parameters:

footOuterDiameter= 22;
footWallThickness= 3;
footWallHeight= 7;
footRetainerHoleDiameter= 21;

prints quite well in PETG and is a snap-fit over the end of a Bessey 2″ C-clamp.


[Bessey2in-WoodClampFoot.stl|attachment](upload://azbd4fr4Nhenh2uepI3EEnu3N3Y.stl) (66.0 KB)