Feedback about: LipSync Wireless


Hi Stewart,

Thank you for your suggestions!

As suggested (in email), I disassembled the LipSync so I can see the lights on the boards. Then I followed the Process above (including a fresh copies of the Arduino IDE 1.8.13 dated July 2020 and the LipSync Wireless microcontroller code). For reference, I am trying to use the LipSync wireless on a Windows PC (running 64-bit Windows 10 Version 2004).

I made changes to LipSync_Wireless_Firmware as in steps 7 – 9 above. With the LypSync connected via USB, under Settings -> Devices -> Bluetooth -> Mouse, keyboard, & pen, the LipSync was listed as Arduino Micro (with mouse icon). Then I followed steps 10 – 13 before reassembling and calibrating the LipSync.

The LipSync works well as long as it is connected to the PC via USB cable (as a mouse as well as being listed as a Bluetooth mouse). However, when I disconnect the USB cable connecting LipSync to the PC and connected to another power source (cell phone charger), the LipSync was no longer discoverable (automatically nor manually).

Please advise.