• This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #12220

    Pen Holder Print
    This design was created by Julia and Paula from Los Makers as part of the Make:Able Challenge.

    Project Need: Agility/Dexterity
    Capabilities Needed: 3D Printing
    Project Link: https://makersmakingchange.com/project/arm-mounted-pen-holder/ 2
    License: Attribution 4.0 International

    The Arm-mounted Pen Holder is an assistive device designed to help persons with spinal cord injuries write using a pen. To achieve this, the device creates a stable writing position by attaching to the arm behind the wrist, and to the pointer finger. Having a more stable position allows the end-user to write by moving their arm rather than their wrist/hand.

    #12226

    where does the pen go?

    #12234

    Hi @KenHackbarth. This device actually uses the pen’s ink reservoir rather than fitting In various pen sizes. The project link in the post above will bring you to our website project page for this device where the usage is explained (https://makersmakingchange.com/?post_type=project&p=7577&preview=true 1). Hope that answers your question :slight_smile: please let me know if you need assistance in requesting, building this device, or have any other questions.

    (

    #12241

    There is probably an opportunity to continue working on this design to create a more modular approach, separating the cuff portion and pen mounting portion.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.