[@]

Stage Prototype
Project Need Vision
Created By Stewart Russell
Capabilities Needed 3D Printing
Time to Complete 2 hours
Cost to Build $1
Creative Commons License attribution-noncommercial-sharealike-4-0-international

Remix of the MMC Clicking Measure case that can be printed vertically without support.

Can be printed in ABS or PLA+.

If you want to rebuild the modified STL file in OpenSCAD, you’ll need the “Case_v.1.0.1.STL” from the Clicking Measuring Wheel, https://makersmakingchange.com/project/clicking-measuring-wheel/

[Author]

Posts