Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #15826

    https://makersmakingchange.com/wp-content/uploads/2022/06/Loop_Handle-scaled.jpg

    MMC Library Link

    https://makersmakingchange.com/project/customizable-beverage-can-opener

    Overview

    The Customizable Beverage Can Opener provides a way for those with arthritis, low finger dexterity, low vision, or other related disabilities to open beverage cans with little strength or accuracy required. There are three different handles available for use with this device, hence the name “customizable.”

    Usage

    Base Can Opener:

    CAD rendering of the base can opener

    The Base Can Opener has a sloped hole which fits over almost all beverage can tabs. The device includes a graphic that describes which side should be facing upwards when opening the can and an arrow pointing towards the can opening. The device is designed to be used on its own or with the handle attached, as described below:

    Cylindrical Handle

    CAD rendering of the cylindrical handle

    This handle is designed to fit the hand and is easy to grip for those with arthritis.

    Flat Handle

    CAD rendering of the flat handle

    The Flat Handle is designed for someone with limited hand function and uses the wrist or elbow to open the can once the can opener is placed on the pull-tab.

    Loop Handle

    CAD rendering of the loop handle

    The Loop Handle is designed to open beverage cans without using fingers. The loop slides over the user’s hand, then the can opener can be used by lifting and twisting the hand.

    Attribution

    Idea for base can opener based on the design of pop-top can opener by Thingiverse User VegasGuy under the Creative Commons license – Attribution – Non-Commercial – No Derivatives.

    Idea for Flat Handle based on Can Opener Helper by Pole Ergo under the Creative Commons license – Attribution – Non-Commercial – No Derivative.

    Full Design and Documentation by Neil Squire / Makers Making Change under a Creative Commons Attribution-ShareAlike 4.0 International License.

    #19199

    I was wondering since you had adapted the can opener, but based the design on one from another individual- does that mean it can be produced for commercial purposes or is it still non-commercial.

     

    Thank you,

    Betsy

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.