• This topic is empty.
Viewing 1 post (of 1 total)
  • Author
  • #14777

    Low Profile Switch

    low profile switch


    MMC Library Link:

    Low Profile Switch – Makers Making Change


    This is a cost-effective 3D printable accessibility switch that only requires the user to lift their finger or hand as high as 8 mm to use it.  This switch would be beneficial for someone who may have a limited range of motion  and would benefit from using a switch that has a large activation area with a minimum switch height.  The switch measures  65 mm L x 65 mm W x 13 mm H and is built using a standard 3.5 mm cable. Using the specified model of tactile switch, the activation force to use the switch is low and is comparable to the force required to activate the light touch switch.


    The switch is well-suited for use by a finger or hand. This switch can be plugged into any standard AT interface. It can also be used with the Xbox Adaptive Controller.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.