Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12249

    Parking Pass Hanger

    Library Link: https://makersmakingchange.com/project/parking-pass-hanger/

    The Parking Pass Hanger is a 3D printed frame that can hang from the rearview mirror of any vehicle, and hold a parking pass for display. This device is printed from PETG in order to withstand the temperatures that the cabin of a vehicle may reach on a hot summer day. The Parking Pass Hanger is ideal for users who use a parking pass where the hook is either broken, does not fit, is too flimsy, or is nonexistent.

    The current design is in Fusion 360 and can be custom fit to different sized passes or rearview mirrors through the parameters function. It can be printed as a single part with supports, but the supports are difficult to clean up. Looking for some feedback on the current design, which is for BC disability parking passes with dimensions 154 mm x 89 mm x 1 mm. The STL and the Fusion 360 file can both be downloaded from the following links:

    Fusion 360 File: Parking Pass Hanger

    SPARC BC STL: Parking-Pass-Hanger

    Note: To fit the print bed, the STLs must be rotated 90 degrees to lay lengthwise across the print bed.

    #13435

    Hi, these files are no longer downloadable, can the link be updated?

    #14088

    Hi there, sorry for the delayed response. The files should now be working!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.