• This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10141
    @

    Created By Makers Making Change
    Capabilities Needed 3D Printing
    Time to Complete 2h
    Cost to Build $0.60
    Creative Commons License Attribution-NonCommercial-ShareAlike

    This 3d printable mounting adapter enables a LipSync 2 to be mounted using commercially available B-Size RAM® mounting systems. The adapter has an external 1/2 inch NPT thread on one side and a 1″ ball on the other. The 1″ ball is compatible with B-Sized RAM® mounts. This adapter can also be used to mount to other devices with a 1/2″ NPT internal thread, such as PVC adapters.

    MMC Library Device Page

    #10142

    We’ve updated the design of this adapter.

    A shoulder portion was added to prevent the adapter from threading in too far. (This could cause the LipSync housing to crack due to the tapered threads.) We also added a hex portion to make it easier to install and remove. A 24 mm wrench, crescent wrench, or slip-joint pliers can be used to help grip the mounting adapter now.

    ![RAM_Adapter_Comparison_v1.2|499×499, 50%](upload://nsAJK7CGd0DzwQfYDa77y1XT7jE.png)

    The print and design files have been uploaded to Thingiverse: https://www.thingiverse.com/thing:3192305

    Let us know how well it works, or if you have ideas for improvement.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.