• This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #9981
    @

    ![Resistive-Touch-Switch|250×175]

    STAGE Prototype
    PROJECT NEED Agility / Dexterity, Mobility
    CREATED BY Makers Making Change
    CAPABILITIES NEEDED 3D Printing, Electronics, Soldering
    TIME TO COMPLETE 3D Print: 4 hr; Assembly: 1hr
    MATERIAL COST —
    CREATIVE COMMONS LICENSE attribution-sharealike-4-0-international

    Overview

    This is a relatively low cost accessibility switch activated by lightly pressing the contact pad. . The switch is comprised of a control box and a contact pad attached by cable to the control box. The output from the control box is a standard 3.5 mm cable. This switch is well-suited for use by a finger.

    Click here for more resources 

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.