• This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #9126
    @

    ![shoulder%20rest|690×332](upload://yTgZ3VVkcB8jaEfz8itIyH7T2Kv.jpeg)

    **Stage** Ideation
    **Project Need** Agility / Dexterity
    **Created By** Zosia Ettenberg
    **Capabilities Needed** 3D Printing
    **Time to Complete** —
    **Cost to Build** —
    **Creative Commons License** attribution-4-0-international

    This phone rest is no longer available. The ones that exist on the market take up the whole length of the phone and as a result the phone no longer fits into the charger. As it is glued to the back of the phone it is not possible to take it off to charge the phone.
    This one has a small piece of it broken off due to a fall and it is no longer totally stable.
    I believe that it could be made on a 3D printer. I would like 5 of them.

    [Click here for more information](https://makersmakingchange.com/project/shoulder-rest-for-chargeable-phone/)

    #9127

    @Hannah I can try to design this part…if I can get measurements of the phone.

    Thanks,
    Gurbaksh Singh | India

    #9128

    This is a pretty old request, but in case Zosia is still waiting for a solution or someone else is looking for it, here’s a first attempt at modeling what I’m seeing in the image.
    ![MMC Forum Phone Shoulder Rest v1|690×387, 75%](upload://yHG6GrQMblwRZ3gOhBs1Px1uquQ.png)
    [Public link to Fusion 360 online part viewer](https://a360.co/2FWO4xA)
    I’m uploading to thingiverse as well ([Thingiverse Link](https://www.thingiverse.com/thing:4581636)) so you can download the f3d file and the stl file as well. Feel free to modify as needed and let me know if anyone tries it out and changes are needed.

    **I would recommend printing it with it lying on it’s side as that will give the curved portion the most strength when pressed with your shoulder**

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.