Viewing 1 post (of 1 total)
  • Author
    Posts
  • #20008

    Switch Adapted Remote Controlled Cartoon Car

    MMC Library Link: https://makersmakingchange.com/project/switch-adapted-rc-car-toy 

    Overview

    This colourful cartoon remote controlled car has been switch adapted so it can be controlled with two 3.5 mm assistive switches. This adaptation is intended for users that have difficulty activating the small buttons on the remote.

    Picture of a colorful cartoon car with a remote control. The remote has one button for forwards and one for reverse and turn. The remote has two assistive switches plugged into it, one is red and black and controls the forwards movement, the other is small and blue and controls the reverse and turn motion.

    Usage

    To use, plug in two assistive switches to the two mono jacks on the back of the remote. When the assistive switch is activated, it will act like the buttons on the remote. The left mono jack (when looking from the front) will act like the left button and will move the car forwards. The right mono jack (when looking from the front) will act like the right button and will move the car backwards and turn.

     

    Back of a remote for a remote controlled car. There are two assistive switches plugged into it, and there are blue arrows showing that the left switch is for the reverse and turn motion and the right switch is for the forwards motion.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.