• This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #10144
    @


    STAGE Prototype

     

    PROJECT NEED Agility / Dexterity, Other

    CREATED BY Stan Cassidy Centre for Rehabilitation Rachelle Bernier

    CAPABILITIES NEEDED 3D Printing, Electronics, Software, Soldering

    TIME TO COMPLETE 3D print: ~8 hours; Assembly: ~5 hours

    MATERIAL COST ~$33 CAD (+ $8 Shipping)

    CREATIVE COMMONS LICENSE attribution-noncommercial-sharealike-4-0-international

    Overview

    The switch modifier is an affordable accessibility device that enables specific switch output functions. With the provided Arduino code, the switch modifier outputs a momentary switch signal for a specific hold duration, in response to a digital input signal. Regardless of the duration of the input signal, the output can be set to any duration from 20 to 500 milliseconds. Manually turning a potentiometer allows for adjustment in output duration.

    Click here for more resources 

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.