[@stephenm]

DSCN0037

Project Need: Mobility/Physical
Capabilities Needed: 3D Printing
Project Link: https://makersmakingchange.com/?post_type=project&p=12780&preview=true
License: Attribution 4.0 International

The Tenting Stand is a fully 3D printed device that allows an R-Go Split Break Ergonomic Keyboard to be supported at 5 different tenting angles. A tenting angle can help reduce pronation of the forearm and improve ergonomics. Using this stand, the user can elevate their keyboard at a 0, 5, 10, 14, or 15-degree angle.

The user can move the legs to whichever angle is best suited to them using the tabs protruding from the front. The stand will then lock into place. When finished, the user can lower the stand back to 0 degrees and leave each half separated, or push them back together.

[Author]

Posts