- This topic is empty.
- This topic has Ready to Build tag assigned
May 29, 2019 at 5:24 pm #9997@
Project Need Agility / Dexterity, Mobility, Vision
Created By Milad Ha
Capabilities Needed Electronics, Software, Soldering
Time to Complete —
Cost to Build —
Creative Commons License attribution-4-0-international
What if you could turn any switch enabled device to a voice activated device? Well, this is exactly the goal of this project.
The accessible voice activated switch includes a HUZZAH32 – ESP32 Feather Board , a 3.5mm male Audio jack to 2 jumper headers cable, an Amazon Echo, and a lithium-ion battery (optional).
This project can benefit anyone who would like to use voice instead of hardware switch buttons to activate a switch enabled device.May 29, 2019 at 5:24 pm #9998
Adding some vendor options from another thread from @MMC_Milad:
1-[Adafruit HUZZAH32 – Elmwoodelectronics](https://elmwoodelectronics.ca/products/adafruit-huzzah32-esp32-feather-board)
2-[Adafruit HUZZAH32(pre-soldered) – buyapi.ca](https://www.buyapi.ca/product/adafruit-huzzah32-esp32-feather-board-pre-soldered/)
If you are willing to make a minor change in the code:
1-[COVVY ESP32 Development Board 2.4GHz](https://www.amazon.ca/COVVY-Development-Dual-Mode-Microcontroller-Integrated/dp/B081V3LTML/ref=sr_1_10?keywords=esp32&qid=1590102190&sr=8-10)
3.5mm Cable to bare wire options:
1-[Right-Angle 3.5mm Stereo Plug to Pigtail Cable](https://www.buyapi.ca/product/right-angle-3-5mm-stereo-plug-to-pigtail-cable/)
2-[Fancasee (2-Pack) Replacement 3.5mm Male Plug to Bare Wire](https://www.amazon.ca/Fancasee-2-Pack-Replacement-Connector-Repair/dp/B07Z49HHGR/ref=sr_1_2_sspa?keywords=3.5mm+to+bare+wire&qid=1590102772)
You can cut one end of a dollar store 3.5mm mono jack cable as well.
1-[Lithium Ion Polymer Battery – 3.7v, 900mAh](https://www.buyapi.ca/product/lithium-ion-polymer-battery-3-7v-900mah/)
2-[Lithium Ion Polymer Battery – 3.7v 2000mAh](https://www.buyapi.ca/product/lithium-ion-polymer-battery-3-7v-2000mah/)May 29, 2019 at 5:24 pm #9999
Can i help here?
- You must be logged in to reply to this topic.