Device Details


The Camera Quick Clamp is an 3D printed adapter for attaching an assistive device to a section of 1/2 inch PVC piping. The clamp has a ¼”- 20 UNC camera thread stud that is compatible with various assistive devices and/or camera mount adapters. The clamp can easily be installed, adjusted, and removed by hand. The Camera Quick Clamp is part of the PVC Assistive Mounting System (PAMS).

The PVC Assistive Mounting System is a collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.



The Camera Quick Clamp is designed to attach to a section of 12 mm / 1/2 inch SCH 40 PVC pipe. Open the latch and position the clamp around the pipe. Hook the latch on the catch and then flip the lever over to lock it into place. Use the 1/4″-20 UNC stud to attach a compatible adapter or device. A rubber band can be added between the clamp and the pipe for a more secure fit.


Construction and Assembly

All of the files and the documentation can be found using in the GitHub Repository or using the links above.