Switch Adapted Bubble Blower Fan
Setup & instructions
The Switch Adapted Bubble Blower Fan is a commercial toy modified for use with an assistive switch. The Switch Adapted Bubble Blower may be beneficial to someone who may have difficulty pressing the original small activation button due to its size, location, or required activation force.
Attach an assistive switch with a 3.5 mm plug to the 3.5 mm jack on the toy. When the assistive switch is activated, the toy will generate bubbles.
The toy is commercially available for about $5. A suitable jack and the necessary wire will bring the total cost to approximately $10.
An installation guide is available at the linked repository.
Assembly Time: 20-30 minutes
- Screwdriver, Phillips, Small
- Soldering Iron
- De-soldering braid / Solder sucker
- Hot Glue Gun
- 1X Play Day Bubble Blower Fan
- 1X 3.5 mm Mono Panel Mount Jack
- 2X Wire, 8 cm
This design does not have any 3D printed components.
This design does not require any programming.
The method and documentation were developed by Neil Squire / Makers Making Change.
No reviews yet
Are you a device user or Disability Professional? Review this device!